Russian vector | Vehicle pass-through four-wheel positioning system · Detection line and assembly line online configuration

Four-wheel aligner Russia VECTOR-7202MAB

Read basic four-wheel positioning data in two minutes | Vehicle specification database of more than 20,000 models | Equipment does not need regular calibrationVECTOR-7202MAB vehicle pass-through four-wheel aligner

2 minutes Easy to operate software Read basic four-round positioning data in two minutes

20000 + Vehicle gauge database for the past 30 years Genuine vehicle specifications for over 20,000 models

Free Periodic Calibration Easy maintenance Equipment does not need to be calibrated regularly

产品概述

VECTOR-7202MAB is a four-wheel aligner from Russia, which adopts a vehicle pass-through installation method to facilitate deployment in the detection line: the vehicle can be driven to the next station through this station, which is suitable for assembly line use. The equipment can be used in pits or with lifts, and users can flexibly choose the installation form according to the civil conditions of existing workshops or testing lines.

In terms of measurement principles, the device uses Aligner's patented positioning imaging system to provide accurate and real-time measurements, further reducing installation and measurement time and improving production efficiency; this proven technology, combined with easy-to-use software, allows operators to read data faster. High-resolution, multiprocessor camera technology that delivers accurate, vivid positioning readings and diagnostic data;The accompanying target disk does not contain electronic components, replacing traditional electronic sensors, thereby eliminating possible equipment failures caused by circuits. The measurement data is transmitted wirelessly through the computer, and no additional signal cables are required at the station.

In terms of measurement efficiency and use cost, there is no need for steel ring compensation during measurement, which reduces the measurement time and improves the accuracy. The software system is simple to operate, and basic four-wheel positioning data can be read in two minutes. The vehicle gauge database contains original vehicle gauge data and information for more than 20,000 models over the past 30 years, enabling operators to quickly and accurately find the appropriate model.The maintenance is simple and easy, and the equipment does not need to be calibrated regularly, which is conducive to reducing the cost of calibration and downtime in the long-term operation of the detection line.

Core Strengths

■Vehicles are mounted by means of passage.Easy to deploy for the detection line, the vehicle can be directly driven to the next station through this station, which is convenient for the use of the assembly line, and it is not necessary to separately arrange a reversing or detouring route for the positioning station. ■Can be used in pits or with lifts.The equipment has strong adaptability to civil construction forms, and can be installed on existing pit-type stations or used in conjunction with lifts. ■Aligner's patented positioning imaging system.Provide accurate, real-time measurement, further reduce installation and measurement time, improve production efficiency; the technology has been fully verified by practice, with easy-to-use software, allowing operators to read data faster. ■High-resolution, multiprocessor camera technology.Provide accurate and vivid positioning readings and diagnostic data to provide an intuitive basis for the determination of test results and the analysis of vehicle conditions. ■The target disk has no electronics.The target disk replaces traditional electronic sensors, eliminates equipment failures that may be caused by circuits, and reduces the workload of troubleshooting and repairing electrical failures.

■Computer wireless transmission.The measurement data is transmitted to the computer wirelessly, the station layout is simple, and the passage of the vehicle is not affected by the cable. ■Rim compensation is not required for measurements.Eliminating the steel ring compensation link shortens the measurement time and improves the measurement accuracy. ■Read basic positioning data in two minutes.The software system is simple to operate, suitable for the strict requirements of the detection line on the detection beat, and also reduces the difficulty for the operator to get started. ■Easy maintenance, no need to calibrate regularly.It is easy to maintain, and the equipment does not need to be calibrated regularly, which is conducive to improving the availability of equipment and controlling long-term use costs. ■30 years, more than 20,000 models of vehicle specification database.The vehicle gauge database contains original vehicle gauge data and information for more than 20,000 models over the past 30 years, enabling operators to quickly and accurately find the appropriate model. ■Friendly operation and debugging interface.The interface is for on-site operation and equipment debugging, which is easy for operators to use daily, and for technical personnel to complete debugging and maintenance.

Structure and detail display

High-precision target (target disk)

High-precision targeting and imaging measurements The measurement front end of the device is composed of a high-precision target and an imaging system. The target is the target disk, on which there are no electronic components, replacing traditional electronic sensors, so there is no measurement failure caused by circuit problems; the measurement is done by Aligner's patented positioning imaging system with high-resolution, multi-processor camera technology, which can provide accurate and real-time measurements as well as accurate and vivid positioning readings and diagnostic data. No measurement cable is required between the target disk and the host, and the measurement data is transmitted wirelessly through the computer. Since the measurement does not require ring compensation, the target can be directly measured after installation, which reduces the measurement time and improves the accuracy.

Friendly operation and debugging interface The software system is easy to operate, and the basic four-wheel positioning data can be read in two minutes, which is suitable for the detection line to organize production according to a fixed beat. The system has a built-in vehicle specification database, with the original vehicle specification data and information of more than 20,000 models in the past 30 years, and the operator can quickly and accurately find the corresponding model without manually entering standard values. The interface also takes into account the debugging needs of the equipment. The technical personnel can complete the daily inspection and debugging operations in the same software environment. The maintenance is simple and easy, and the equipment does not need to be calibrated regularly, reducing the downtime arranged for the detection line due to calibration.

Operation and debugging interface

Scope of supply

Scope of supply and station composition The entire system consists of a measuring unit, a target disk (target), a computer and positioning software. It is delivered in the form of a pass-through station, which can be accessed as an independent station in the detection line, and can also be arranged with a pit or a lift. The equipment adopts the vehicle pass-through installation method, and the vehicle can be driven to the next station through this station to facilitate the use of the pipeline; the measurement data is transmitted wirelessly through the computer, and there is no need to lay measurement cables between the vehicle and the host computer at the station, making daily passage and cleaning and maintenance more convenient. The specific supply list is subject to the contract agreement. Our company can provide configuration suggestions and installation and commissioning services according to the project conditions.

On-site use In field use, the vehicle is driven into the station by a pass-through path, and the operator can start the measurement under the guidance of the software after installing the target disk. Thanks to the absence of steel ring compensation and simple operation process, the positioning data reading of a single vehicle can be controlled within two minutes, which is suitable for the organization of off-line inspection of the whole vehicle and batch inspection of the detection line. The equipment has a good adaptability to the installation conditions, which can be used for the pit station or the lifting machine; the target disk does not contain electronic components, and the equipment does not need to be calibrated regularly, so that the on-site maintenance work is mainly concentrated on the daily cleaning and inspection of mechanical and optical components, which is conducive to maintaining the continuous operation of the detection line.

On-site use

Technical Parameters

The following table shows the measurement range and accuracy of VECTOR-7202MAB. The values are taken from the product technical data and have not been changed.

Measurement content	精度	Scope	Accuracy Total Measurement Range
Total anterior bundle (front wheel)	0. 02	0. 2	0.80
Single anterior bundle (anterior and posterior)	0. 02	0. 2	0. 4
Camber angle	0. 02	0.80	0.80
Retract Angle	0. 02	0. 2	0. 4
Thrust angle	0. 02	0. 2	0. 4
caster	0.05	19	19
Angle of Inclusion	0.05	19	19
Maximum steering angle	0:08	0. 50	0. 50
Tilt Back Adjustment	0. 02	0.80	0.80

Other confirmed technical capabilities: Vehicles can be installed through the pit or with the use of a lift; computer wireless transmission; no steel ring compensation is required for measurement; the software reads the basic four-wheel positioning data within two minutes; the equipment does not need to be regularly calibrated; the vehicle specification database contains the original vehicle specification data of more than 20,000 models in the past 30 years.

Application flow

As a passing station, the vehicle enters and exits in the normal driving direction, and the application process is as follows:

1. The vehicle enters the positioning station in the direction of the assembly line; the station can be set on the pit or used in conjunction with the lift.
2. Mount the target disk (target) on the wheels. The target disk has no electronic components, and there is no need for steel ring compensation after installation.
3. The measurement data is wirelessly transmitted to the system host through the computer, and collected and solved by Aligner's patented positioning imaging system and high-resolution, multi-processor cameras.
4. The software system automatically matches the model according to the vehicle gauge database, and retrieves the original vehicle gauge data and information of the model.
5. Read basic four-wheel positioning data in two minutes and output positioning readings and diagnostic data.
6. The vehicle passes through this station to the next station and continues the subsequent process without affecting the pipeline beat.

Application Scenarios

Vehicle factory and inspection line: The vehicle can be conveniently deployed to the inspection line through the installation method, and the vehicle can be used in the next station through this station to facilitate the use of the assembly line; the efficiency of reading the basic four-wheel positioning data within two minutes matches the beat requirements of the vehicle off-line detection. The equipment can be used in the pit or with the lift to facilitate the transformation of the station or new construction under the conditions of the existing plant.

For comprehensive inspection and maintenance enterprises: The vehicle specification database has the original vehicle specification data and information of more than 20,000 models in the past 30 years, so that operators can quickly and accurately find the corresponding model, reducing the time for model search and standard value entry; the target disk does not have the design of electronic components and equipment without regular calibration, reducing the technical threshold of daily maintenance.

For multi-vehicle mixed-line production: High-resolution, multi-processor camera technology provides accurate and vivid positioning readings and diagnostic data, combined with extensive vehicle specification databases and wireless data transmission covering the models, so that the same production line can adapt to the mixed-line detection needs of multiple models.

Description: The product technical data on which this page is based does not list the specific project cases of this model. The above are typical scenarios for this equipment.

Support

Warranty: One year free warranty and lifetime discount service for the hardware equipment and network system provided. During the free warranty period, any damage caused by the quality and technical failure of the equipment itself, the installation process, etc., shall be repaired and replaced by our company free of charge.

Software upgrades: The latest software updates or upgrades are available free of charge for life.

Personnel training: Provide on-site training services to user operators and technicians, so that operators can master the operation and use of all equipment software, so that technicians can master the working principle of the entire system and the diagnosis and maintenance of common faults. After the installation of each project is completed, an engineering technician can be left to provide on-site guidance according to the situation to ensure that the operators and technicians of each position of the user can be qualified to evacuate after their work.

Repair response time: After receiving the call from the user, the repair response time is within 4 hours, and the on-site time is within 24 hours.

Contact us

Beijing Taiyuanxiang Technology Co., Ltd.

Phone: 010-89780650 Mobile: 18611929790 (Li Yongpo)

Email: liyongpo@taiyuanxiang.cn

Address: Room 3027, Building 1, Hongfu No. 10, Beiqijia Town, Changping District, Beijing

Service content: complete machine sales, installation and commissioning, calibration and accuracy check, operation training, after-sales maintenance and spare parts supply

Note: The product pictures, parameters and function descriptions on this page are compiled from the product technical data and are used for product introduction only. The appearance, configuration and technical parameters of the product will be updated without notice. The specifics shall be subject to the physical and contractual agreements.