Double-Axle ABS Brake Test Bench (Reaction Type)

Vehicle off-line testing equipment | Beijing Taiyuanxiang Technology Co., Ltd. ABS dual axle brake test bench (reaction type) wheelbase 2300-3200mm, sand adhesion coefficient 0.9, braking force 0-3000N/axle ± 1%;Support ABS communication initialization, wheel speed sensor and pump valve testing. The SPC database of 100,000 ABS double-axis brake test bench reaction table and control cabinet reaction structure + shallow foundation pit unsupported leg frame is simple and easy to install, the vehicle passage load is ≥ 1000kg/wheel, and the pit cover plate has anti-skid function. The diameter of the adhesive drum drum is 245mm, the center spacing is 400mm, the dry adhesion coefficient is 0.9, the drum diameter is large, the adhesion coefficient is large, the operation is stable, the accuracy is reliable, and the maintenance is convenient.The roller brake uses a brake motor to facilitate the driving in and out of the vehicle; the lifting device is operated by a cylinder, the maximum lifting force is ≥ 1000kg/wheel, and a side stop device is provided. Product Overview The biaxial ABS brake test bench detects the ABS system and other brake detection items specified in GB7258-2017 within the production beat.The equipment is a reaction type structure, which adopts a shallow foundation pit and an equipment frame without supporting legs. It is mainly composed of a brake drum, a lifting device, a driving motor and a frequency conversion controller, a wheelbase adjustment unit, a brake measurement unit, an axle load measurement unit, a control cabinet and a software system.The equipment can complete the braking force test of each wheel, the left and right wheel brake difference test of each axle, the resistance test of each wheel, the parking braking force test, the pedal force and hand tension test, and the wheel weight test of the vehicle. The detection speed range can be set, generally 2.5km/h-8km/h. The ABS system test supports three models of ABS and reserves expansion space for other models to ensure that there is sufficient software and hardware space and upgrade functions for subsequent model expansions.Core advantages:■ reaction structure + shallow foundation pit without support leg frame, simple civil construction, easy installation, vehicle passage load ≥ 1000kg/wheel, pit cover plate with anti-skid function. Sand■ adhesive roller: roller diameter 245mm, center spacing 400mm, dry adhesion coefficient 0.9, large roller diameter, large adhesion coefficient, stable operation, reliable accuracy, convenient maintenance. The■ roller brake adopts a brake motor, which is convenient for the vehicle to drive in and out;The lifting device is operated by a cylinder, with a maximum lifting force of ≥ 1000kg/wheel, and is equipped with a side stop device. Each of the■ 4 rollers has an independent drive motor (4kW, AC380V/3Phase/50Hz), with a Siemens inverter for flexible control. The■ wheelbase adjustment system is screw driven, the linear displacement sensor feedbacks position information, the adjustment accuracy is ± 1mm, and the adjustment speed is 100mm/s; the ball screw and linear guide are equipped with a dust cover to prevent impurities from entering.The ■ braking force measurement uses a reaction arm + pressure sensor to accurately calculate the braking force of the wheel, which is far better than the calculation of the inverter current method.■ ABS depth detection capabilities: ABS communication initialization, ECU ID reading and error-clearing, I/O testing, test process scanning ECU error, ABS sensor testing (crossover, sensor function, wheel speed sensor clearance, signal quality), ABS pump and valve testing (check whether the valve and pump are working properly by braking force establishment and release).■ Wireless pedal hand tension equipment (1 pedal force meter + 1 set of hand tension meter), which meets the corresponding national standards.■ Equipped with a lever-type static brake force calibration device, the brake force measurement mechanism can be calibrated; the control cabinet adopts the Witu brand (RAL7035, IP54) and is equipped with industrial air conditioning. The■ SPC database can be queried and printed in various ways, and the database can maintain the detection data of not less than 100,000 vehicles;With data networking capability, model information can be obtained from the factory network and the test results can be returned according to user requirements.■ With the function of displaying the braking force curve during the braking force measurement, the user can call, store and print the analysis by himself; the 42-inch suspension display displays the front and rear axle braking force, braking force difference, hand braking force and ABS test flow in real time.Structure and details Equipment composition: frame, brake drum, lifting device, drive motor and measurement unit brake drum (sand adhesion drum, dry adhesion coefficient 0.9) Control cabinet and software: real-time test process monitoring, calibration interface and brake force curve Main technical parameters Wheelbase range 2300 ~ 3200mm; 1400 ~ 1600mm Detection speed range is general 2.5km/h - 8km/h, load-bearing capacity can be set to ≥ 1500kg/shaft, accuracy and repeatability are ≤ 1% full-scale reaction type braking force 0-3000N/shaft, accuracy and repeatability are ± 1.0% Parking brake measurement 0-3000N/shaft, ± 1.0% pedal force measurement 0-800N, ± 1.0% Parking brake hand pull force 0-800N, ± 1.0% roller parameter Sand-bonded roller dry state adhesion coefficient 0.9; roller diameter 245mm; roller center spacing 400mm; roller brake is operated by brake motor lifting device cylinder;Maximum lifting force ≥ 1000kg/wheel; with side stop drive motor and inverter AC motor, Siemens inverter; motor power supply AC380V/3Phase/50Hz, power 4kW; 4 rollers each have independent drive motor wheelbase adjustment unit AC motor + Siemens inverter; screw drive, linear displacement sensor feedback; adjustment accuracy ± 1mm; adjustment speed 100mm/s; equipped with dust cover brake/axle load measurement unit reaction arm + pressure sensor;Axle load sensor (can weigh, manually input or call database axle load) control cabinet Weitu brand, RAL7035, IP54; with industrial air conditioning, AC220V lighting and sockets; PLC + industrial control computer; field bus Profibus; with UPS main control computer CPU i5 and above; memory 8G or more; SSD 512G or more; optical drive; 21 "LCD display; USB and serial port; Chinese version of Windows electrical parts and safety Schneider or Müller low-voltage components; control voltage DC24V;Isolated transformer protection control circuit; safety relay control; industrial computer and PLC with fault diagnosis, shutdown and alarm display; power line and control signal slotting and wiring software functions based on Windows10 Chinese operating system, full Chinese interface; parameter setting, real-time test process monitoring, calibration interface, error information prompt; ABS test software; brake force curve display and call, storage, print analysis;SPC database driver operation and display vehicle entering workstation (barcode scanner + input keyboard); 42 "suspended display; driver operation panel (lifter lift button and test selection button, height and distance adjustable);The top of the control cabinet and the pre-entry workbench are each equipped with a three-color signal project Case Chery South Commercial Vehicle, Chery Malaysia, Bangladesh, Shijiazhuang Ruiteng Automobile Contact Us Beijing Taiyuanxiang Technology Co., Ltd. Telephone: 010-89780650 Mobile: 18611929790 (Li Yongpo) Email: liyongpo @ taiyuanxiang.cn Address: Room 3027, Building 1, Hongfu No. 10, Beiqijia Town, Changping District, Beijing Service Content: Scheme design and basic funding, equipment manufacturing and integration, transportation installation and commissioning, operation training, acceptance support, after-sales maintenance and spare parts supply Note: The parameters and pictures on this page are arranged from the product technical program, and are used for product introduction only. The size, configuration and technical parameters of the equipment can be customized according to user requirements. If there is any update without prior notice, the specific contract and technical agreement shall prevail.